mirror of
https://github.com/rakshasa/rtorrent.git
synced 2026-10-05 05:39:22 +00:00
Auska
4c6f7afdc7
Mirror the network.local_address.* command family for ports:
- network.local_port report the best-match local port
- network.local_port.set set both the ipv4 and ipv6 local ports
- network.local_port.ipv4(.set) get/set the ipv4 local port only
- network.local_port.ipv6(.set) get/set the ipv6 local port only
Values are restricted to 0-65535; 0 (default) means unset, and trackers
then report the listening port.
Why: behind multiple layers of NAT the port peers must connect to can
differ from the port rtorrent is listening on. These commands let the
user manually advertise the forwarded public port per address family,
e.g.:
network.local_port.ipv4.set = 6881
network.local_port.ipv6.set = 6882
network.local_port is marked safe for RPC use alongside
network.local_address.
149 lines
5.0 KiB
Plaintext
149 lines
5.0 KiB
Plaintext
#############################################################################
|
|
# This is an (old) example resource file for rTorrent.
|
|
# Copy to ~/.rtorrent.rc and enable/modify the options as needed.
|
|
# Remember to uncomment the options you wish to enable.
|
|
#
|
|
# See 'rtorrent.rc-example' for a newer, basic configuration.
|
|
#
|
|
# Sample: https://github.com/rakshasa/rtorrent/wiki/CONFIG-Template
|
|
# Complete: https://rtorrent-docs.readthedocs.io/en/latest/cmd-ref.html
|
|
# Useful: https://rtorrent-docs.readthedocs.io/en/latest/use-cases.html
|
|
# Manual: https://rtorrent-docs.readthedocs.io/en/latest/
|
|
# Convert: https://github.com/rakshasa/rtorrent/wiki/rTorrent-0.9-Comprehensive-Command-list-(WIP)
|
|
# Handbook: https://media.readthedocs.org/pdf/rtorrent-docs/latest/rtorrent-docs.pdf
|
|
# File: https://github.com/rakshasa/rtorrent/blob/master/doc/rtorrent.rc
|
|
#############################################################################
|
|
|
|
# Maximum and minimum number of peers to connect to per torrent.
|
|
#
|
|
#throttle.min_peers.normal.set = 40
|
|
#throttle.max_peers.normal.set = 100
|
|
|
|
# Same as above but for seeding completed torrents.
|
|
# "-1" = same as downloading.
|
|
#
|
|
#throttle.min_peers.seed.set = 10
|
|
#throttle.max_peers.seed.set = 50
|
|
|
|
# Maximum number of simultaneous uploads per torrent.
|
|
#
|
|
#throttle.max_uploads.set = 15
|
|
|
|
# Global upload and download rate in KiB.
|
|
# "0" for unlimited.
|
|
#
|
|
#throttle.global_down.max_rate.set_kb = 0
|
|
#throttle.global_up.max_rate.set_kb = 0
|
|
|
|
# Default directory to save the downloaded torrents.
|
|
#
|
|
#directory.default.set = ./
|
|
|
|
# Default session directory. Make sure you don't run multiple instance
|
|
# of rTorrent using the same session directory. Perhaps using a
|
|
# relative path?
|
|
#
|
|
#session.path.set = ./session
|
|
|
|
# Watch a directory for new torrents, and stop those that have been
|
|
# deleted. Use directory.watch.ready for network shares or other watch
|
|
# directories where files may be copied or written directly into place.
|
|
# Do not mix directory.watch.ready and directory.watch.added on the same
|
|
# watch directory.
|
|
#
|
|
#directory.watch.ready = ./watch, load.start
|
|
#schedule2 = watch_directory,5,5,load.start=./watch/*.torrent
|
|
|
|
# Close torrents when disk-space is low.
|
|
#
|
|
#schedule2 = low_diskspace,5,60,close_low_diskspace=100M
|
|
|
|
# The IP address reported to the tracker.
|
|
#
|
|
#network.local_address.set = 127.0.0.1
|
|
#network.local_address.set = rakshasa.no
|
|
|
|
# The port reported to the tracker, separate for ipv4/ipv6. A value of 0
|
|
# (the default) falls back to reporting the listening port. network.local_port.set
|
|
# sets both the ipv4 and ipv6 ports at once.
|
|
#
|
|
#network.local_port.set = 6881
|
|
#network.local_port.ipv4.set = 6881
|
|
#network.local_port.ipv6.set = 6882
|
|
|
|
# The IP address the listening socket and outgoing connections is
|
|
# bound to.
|
|
#
|
|
#network.bind_address.set = 127.0.0.1
|
|
#network.bind_address.set = rakshasa.no
|
|
|
|
# Port range to use for listening.
|
|
#
|
|
#network.listen.port.range.set = 6890-6999
|
|
|
|
# Start opening ports at a random position within the port range.
|
|
#
|
|
#network.listen.port.random.set = no
|
|
|
|
# Set RPC type
|
|
#network.rpc.use_xmlrpc.set = true
|
|
#network.rpc.use_jsonrpc.set = true
|
|
|
|
# Check hash for finished torrents. Might be useful until the bug is
|
|
# fixed that causes lack of disk-space not to be properly reported.
|
|
#
|
|
#pieces.hash.on_completion.set = no
|
|
|
|
# Set whether the client should try to connect to UDP trackers.
|
|
#
|
|
#trackers.use_udp.set = yes
|
|
|
|
# Alternative calls to bind and IP that should handle dynamic IP's.
|
|
#
|
|
#schedule2 = ip_tick,0,1800,ip=rakshasa
|
|
#schedule2 = bind_tick,0,1800,bind=rakshasa
|
|
|
|
# Encryption options, set to none (default) or any combination of the following:
|
|
# allow_incoming, try_outgoing, require, require_RC4, enable_retry, prefer_plaintext
|
|
#
|
|
# The example value allows incoming encrypted connections, starts unencrypted
|
|
# outgoing connections but retries with encryption if they fail, preferring
|
|
# plain-text to RC4 encryption after the encrypted handshake.
|
|
#
|
|
# protocol.encryption.set = allow_incoming,enable_retry,prefer_plaintext
|
|
|
|
# Enable DHT support for trackerless torrents or when all trackers are down.
|
|
# May be set to "disable" (completely disable DHT), "off" (do not start DHT),
|
|
# "auto" (start and stop DHT as needed), or "on" (start DHT immediately).
|
|
# The default is "off". For DHT to work, a session directory must be defined.
|
|
#
|
|
# dht.mode.set = auto
|
|
|
|
# UDP port to use for DHT.
|
|
#
|
|
#dht.port.set = 6881
|
|
|
|
# Enable peer exchange (for torrents not marked private).
|
|
#
|
|
#protocol.pex.set = yes
|
|
|
|
# Set download list layout style ("full", "compact").
|
|
#
|
|
#ui.torrent_list.layout.set = "full"
|
|
|
|
# Set navigation keymap style ("vi", "emacs"). Default is "emacs".
|
|
#
|
|
#ui.keymap.style.set = "emacs"
|
|
|
|
# Run rTorrent as a daemon, controlled via XMLRPC.
|
|
#
|
|
#system.daemon.set = false
|
|
|
|
# SCGI Connectivity (for alternative rtorrent interfaces, XMLRPC)
|
|
# Use a IP socket with scgi_port, or a Unix socket with scgi_local.
|
|
# schedule can be used to set permissions on the unix socket.
|
|
#
|
|
#network.scgi.open_port = "127.0.0.1:5000"
|
|
#network.scgi.open_local = (cat,(session.path),/rpc.sock)
|
|
#schedule2 = socket_chmod, 0, 0, "execute.nothrow=chmod,770,(cat,(session.path),/rpc.sock)"
|